 |
» »
MDU & Business
|
|
|
EZ-Bend® InvisiLight™ Optical Solution >>>
OFS' EZ-Bend® InvisiLight™ Optical Solution is a revolutionary new system that enables fast, easy, virtually invisible in-residence fiber drop connections. The installer uses an innovative simple process to adhere a tiny (< 1 mm diameter) micro-drop fiber into the grooves between molding and walls or ceilings, resulting in a protected fiber link that blends seamlessly into the residence.
|
EZ-Bend® InvisiLight™ Optical Solution brochure (412.32 KB)
AllWave® Fiber >>>
AllWave® Zero Water Peak (ZWP) Single-Mode Fiber is the first fiber designed for optimum performance in local/access metro networks. The elimination of the water-peak in AllWave fiber provides 50% more spectrum as compared to single-mode fiber.
|
AllWave® ZWP Fiber (1.13 MB)
AllWave® FLEX ZWP Single-Mode Fiber >>>
AllWave® FLEX Fiber is an ITU-T G.657.A bend-optimized single-mode design fully compatible with the installed base of G.652.D fiber, targeting indoor applications and bend-challenged outside plant (OSP) applications with bend radii down to 10 mm.
|
AllWave® FLEX ZWP Fiber (1.15 MB)
EZ-Bend® Multifiber Drop Bundle >>>
The EZ-Bend® Multifiber Drop Bundle provides the same high performance that the single fiber EZ-Bend Assemblies provide but has the added benefit of saving time in installation by pulling 5, 6 or 12 assemblies at one time.
|
EZ-Bend® Multifiber Drop Bundle Brochure (595.35 KB)
V-Linx™ Combiner >>>
The V-Linx™ Combiner aggregates the optical paths from up to six V-Linx Terminals (up to 72 individual units).
|
V-Linx™ Combiner (564.74 KB)
V-Linx™ Fiber Distribution Hub (FDH) >>>
The V-Linx™ Fiber Distribution Hub (FDH) can support up to 144 units/128 splitter ports and is designed for NEMA 12 performance. The FDH is size-optimized by leveraging the very compact Direct Connect™ PLC Splitter.
|
V-Linx™ Fiber Distribution Hub (FDH) (598.69 KB)
TriBox™ Fiber Management Unit >>>
The TriBox™ Fiber Management Unit (FMU) provides distribution for the fiber in the outside plant closer to the customer premise. The TriBox™ FMU houses both the terminations and splices.
|
TriBox™ Fiber Management Unit (FMU) Brochure (304.07 KB)
V-Linx™ Terminal >>>
The V-Linx™ Terminal is a comprehensive, multi-functional 12-port terminal system that combines fiber storage and a handsfree pay-off feature in a single factory-terminated device.
|
V-Linx™ Terminal (626.82 KB)
400 Series LIU (Wall Mount) >>>
The 400A interface unit is a modular enclosure that provides cross-connect and interconnect capabilities for splicing and terminating Outside Plant Cables (OSP) or Fiber Optic Building Cables.
|
400A Fiber Optic Interface Unit (327.56 KB)
MPO Fanout Module >>>
The Multi-Fiber Push-On (MPO) to Single Fiber Optical Fanout Module provides a innovative plug and play solution to the needs of today’s FTTX, Telecom, and Datacom networks.
|
MPO Fanout Module (407.71 KB)
SlimBox™ Customer Splice Point (CSP) Module >>>
The SlimBox™ Customer Splice Point (CSP) Module is an excellent choice as an internal or external demarcation closure, featuring dual functionality as either a splice or connector housing.
|
SlimBox™ Customer Splice Point (CSP) Module (397.83 KB)
SlimBox™ 12-Fiber Wall Mount Module >>>
The SlimBox™ 12-Fiber Wall Mount Module is both a termination and splice point for optical fiber in an indoor wall mounted environment. Cable enters from the bottom and the grommets allow for pass through of the fiber without splicing.
|
SlimBox™ 12-Fiber Wall Mount Module (418.54 KB)
SlimBox™ 4-Fiber Rosette Module (438.45 KB)
Connectorized MiniCord® Riser-Rated Breakout Cable >>>
The OFS Connectorized MiniCord® Riser-Rated Breakout Cable answers the need for a robust and reliable cabling solution that can handle most indoor applications or equipment rooms. MiniCord Breakout cables with 12 fibers or less consist of two to twelve 1.6 mm MiniCord subunits encased in a PVC outer jacket. For cables with 18 to 36 fibers, each 1.6 mm MiniCord subunit is placed into a separate unit tubes with either 6 or 12 1.6 mm MiniCords in each unit tube. The MiniCord subunits are color coded for easy recognition.
|
Connectorized MiniCord Breakout Cable (916.12 KB) 
|
|
|
The 
